Vermont Oversize
Permits & Escorts

VERMONT OVERSIZE PERMITS & ESCORTS INFORMATION
Important! We are not a permit service.  We do not arrange permits for carriers.  The following is for informational purposes only.  Always read your permits and provisions sheets carefully. We cannot guarantee the accuracy of the information provided.
Vermont DOT Phone Number
802-828-2000

PERMITS

Vermont oversize permits are valid for ten travel days. Must have permit prior to entering the state.

OPERATING TIME

One-half hour before sunrise to one-half hour after sunset. No weekend travel for loads over 10’ 6” wide, 100’ in length, or 108,000 pounds gross. Movement may be restricted on Friday afternoons between July 1st and Labor Day. Overweight only and capable of traveling with the traffic flow are not restricted to daylight travel.

RESTRICTED TRAVEL

Permits for loads not originating or delivering in Vermont are only issued if travel through Vermont is the most direct route. Vermont tries not to permit loads not originating or ending in Vermont. Unless otherwise posted, speeds are not to exceed 45 miles per hour on state highways for loads exceeding 90,000 pounds or 10 feet in width, overheight, or over 75’ long. No travel on holidays for loads over 10’ 6” wide, 100’ in length, or 108,000 pounds gross.

LEGAL DIMENSIONS

Length:

53′ semi-trailer on Interstate and designated highways (43′ Kingpin to center of rear axle)

75′ overall length

48′ trailer on non-designated highways

Width: 8’6″

Height: 13’6″

Weight: 80,000 Gross

Single – 20,000 designated highways, 22,400 other roads

Tandem – 34,000 designated highways, 36,000 other roads

Tridem – Federal Bridge Formula (34,000 for 8′ axle spacing, 42,500 for 9′ of spacings)

ROUTINE PERMIT LIMITS

Length: 99′

Overhang: Not to exceed one-third the length of the load.

Width: 14’11”

Height: 13’11”

Weight: “Department decides on a case-by-case basis.”

Loads exceeding these dimensions or exceeding 150,000 pounds gross weight are treated as super loads and require an engineering review for state highways. This can take up to 10 working days.

The costs for an engineering review are:

$800 for loads under 150,000 pounds gross

$2000 for loads from 150,001 to 200,000 pounds gross

And even higher for heavier loads

ESCORTS

Length: At 80′ or greater – 1 escort

Overhang: At 15′ or greater – 1 escort

Note: A second escort may be required at the state’s discretion.

Width: At 12′ or greater – 1 escort

Height: Usually not required (over 14′ height is very restricted)

SIGNS, FLAGS & LIGHTS

“Oversize Load” sign required on the front of an oversize vehicle and on the rear of the vehicle or load for any O/D move. Mount flags (at least 18″ square) on corners and extremities of overwidth and overlength loads or vehicles. For overlength loads or rear overhangs that exceed 4 feet, one flag shall be displayed at the end of the overhang if it is less than 2 feet wide, and two flags if the overhang is 2 feet wide or greater. Loads at and over 12 feet wide or 80 feet overall length require a flashing amber light on the towing vehicle. Signs are not required for movements that are overweight only.

Contact us.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
GET IN TOUCH WITH US

We care more and work harder.

With over 10 years of experience in the industry, we have developed a reputation for excellence in providing our clients with reliable, cost-effective, and innovative logistics solutions.

Freight Stack is pleased to partner with WEL Companies of De Pere, Wisconsin. We couldn't be happier with the support WEL Companies provides to us and our customers. WEL Companies has been in business since 1962 and now boasts over 500 trucks, 700 trailers, 7 terminals and cross docks throughout the United States. By partnering with WEL Companies we are able to focus on our business of brokering freight

Let's Chat